28x9-15 (8.15x15)

28x9-15 / 8.15-15 Forklift Tires

28x9-15, also commonly written as 8.15-15, is a common drive (front) forklift tire size used on many mid-to-large capacity internal combustion forklifts in warehouse, lumber yard, manufacturing, distribution, and outdoor material handling environments.

This page helps you shop 28x9-15 forklift tires by construction type, with access to Solid Resilient, Pneumatic Tube-Type, lockring wheels, mounted assemblies, and matched tire sets.

28x9-15 and 8.15-15 Are the Same Size Class

Both 28x9-15 and 8.15-15 refer to the same forklift tire size class. The way the size is written can vary by manufacturer, product type, and construction.

28x9-15 is commonly shown in an overall diameter × width × rim diameter format, while 8.15-15 is a traditional industrial size shorthand commonly used in forklift applications.

Always confirm the exact size printed on your current tire sidewall and verify wheel hardware before ordering.

Common Drive Tire Pairings

28x9-15 / 8.15-15 is most commonly used in the front drive position on larger IC forklifts.

Common matched steer or companion sizes include:

Depending on the forklift model, axle setup, and wheel configuration, the correct matched size can vary. Always confirm your truck’s current tire setup before purchasing a full set.

Shop 28x9-15 by Construction Type

28x9-15 forklift tires are commonly available in the following constructions:

Pneumatic Tube-Type (TTF) — Air-filled bias forklift tires that use a tire, inner tube, and liner flap. These are commonly selected for mixed indoor and outdoor environments where ride cushioning and impact absorption are important. Ply ratings can vary by manufacturer and application.

Solid Resilient (RS) — Flat-proof, pneumatic-shaped solid rubber forklift tires designed to reduce downtime caused by punctures while maintaining stable load handling. These are commonly chosen for demanding industrial environments where uptime is critical.

Browse Pneumatic and Solid Resilient Forklift Tires →

Quick Links for 28x9-15 Shoppers

Shop 15x7 6-Hole Lockring Wheel →
Shop 28x9-15 & 6.50-10 Sets →
Shop 28x9-15 & 7.00-12 Sets →
Shop 28x9-15 & 250x15 Sets →
Shop 28x9-15 & 300x15 Sets →
View Tire & Wheel Assemblies →

Black Rubber and Non-Marking Options

28x9-15 solid resilient forklift tires are commonly available in both standard black rubber and non-marking compounds.

  • Standard Black Rubber — Common for general industrial and outdoor use where floor marking is not a primary concern.
  • Non-Marking Rubber — Common for clean warehouse and regulated environments where reducing floor marks is important.

Compatible Wheel Hardware

This size commonly mounts on a 15x7 6-Hole Lockring Wheel.

Because bolt pattern, center bore, and offset can vary by forklift model, always verify your wheel specifications before ordering wheels or mounted assemblies.

Mounted Tire and Wheel Assemblies

If you want a faster installation path, mounted tire and wheel assemblies can simplify ordering and reduce downtime compared with sourcing the tire and wheel separately.

View Tire & Wheel Assemblies →

Common Matched Tire Configurations

28x9-15 drive tires are frequently matched with the following sizes depending on forklift capacity and wheel setup:

6.50-10
7.00-12
6.00-9
250x15
300x15

Choosing the Right 28x9-15 Forklift Tire

The right 28x9-15 / 8.15-15 forklift tire depends on your load demands, operating surface, wheel type, floor marking requirements, and tolerance for flat-related downtime. Review the available construction types, wheel options, and matched set choices on this page to find the best fit for your forklift and application.