6.50R10 / 6.50x10 /7.50R10 / 7.50x10 Tire Inner Tube with TRJS2 Stem
SKU 65075010FTC-TRJS2
$55.01 each
2 for · 4+ items 15% off, sizes can mix
Save 7.5% on 2–3 eligible items and 15% on 4 or more, automatically in cart · Free ground freight to business addresses in the lower 48 · Fitment help (866) 313-2180
SKU 65075010FTC-TRJS2
$55.01 each
2 for · 4+ items 15% off, sizes can mix
SKU 6906009FTC-TRJS2
$53.44 each
2 for · 4+ items 15% off, sizes can mix
SKU 70012FTC-TR75A
$79.21 each
2 for · 4+ items 15% off, sizes can mix
SKU 82515FTC-TR75
$77.03 each
2 for · 4+ items 15% off, sizes can mix
SKU 5705008FTC-TRJS2
$48.72 each
2 for · 4+ items 15% off, sizes can mix
SKU 120020DBLWGTFTC-TR75A
$171.41 each
2 for · 4+ items 15% off, sizes can mix
SKU 2891581515FTC-TR75
$62.88 each
2 for · 4+ items 15% off, sizes can mix
SKU 70012DBLWGTFTC-TR75A
$107.84 each
2 for · 4+ items 15% off, sizes can mix
SKU 25030015FTC-TR77
$62.88 each
2 for · 4+ items 15% off, sizes can mix
SKU 70075015FTC-TR75A
$72.31 each
2 for · 4+ items 15% off, sizes can mix
Not sure which one fits? Send a photo of your tire's sidewall, your forklift make and model, and how many you need to sales@forklifttire.com, or call (866) 313-2180, Mon–Fri 8–5 Pacific.
Shop inner tubes for pneumatic tube-type forklift and industrial tires, organized by valve stem type. Each tube is designed to hold air inside a pneumatic tire and must match your tire size, valve stem type, and rim hole configuration exactly.
Inner tubes are a critical component of tube-type tire assemblies — the wrong tube size or valve type will not install or function correctly. Use this page to find the correct replacement by valve type first, then match the tire size.
Save 7.5% on 2–3 items | Save 15% on 4+ items — automatic discount in cart.
Free ground freight to commercial addresses in the contiguous U.S.
Inner tubes are organized by valve stem type because this is the most common source of ordering mistakes. The valve must match your wheel's access hole in size, angle, and clearance. Select your valve type below to see available sizes.
85° bend • 150 psi max
Trucks & industrial
Offset metal clamp-in
Industrial applications
Straight metal clamp-in
Industrial applications
90° bend metal clamp-in
Industrial & OTR applications
Straight metal clamp-in
Large bore • OTR & industrial
Large bore straight
Heavy equipment
Large bore straight
Heavy equipment
Bent metal clamp-in
Industrial applications
Straight rubber snap-in
Small equipment
Straight metal
Forklift & industrial
70° bend • 60 psi max
Industrial trucks & trailers
Large bore clamp-in
OTR & loader applications
A pneumatic tube-type tire assembly is made up of three components that work together:
| Component | Function | Shop |
|---|---|---|
| Pneumatic Tire | The outer casing that contacts the ground — provides traction, load support, and puncture resistance | Shop Pneumatic Tires |
| Inner Tube | Holds air pressure inside the tire — must match the tire size and have the correct valve stem for the wheel | You are here |
| Liner Flap | Sits between the tube and wheel rim — protects the tube from friction, pinching, and sharp rim edges | Shop Liner Flaps |
When replacing an inner tube, check whether the liner flap also needs replacement. A damaged or missing flap can cause premature tube failure from rim contact.
Important: The valve stem type must match your wheel's rim hole exactly — in size, angle, and clearance. Even if the tube size is correct, the wrong valve will not install or function properly. If you are unsure which valve type your wheel uses, check the current tube or contact us with photos of the valve and rim hole.
Follow these steps to identify the correct replacement tube:
The most commonly ordered forklift inner tube sizes include:
Larger OTR and loader sizes — including 15.5x25, 16.00x25, 20.5x25, 23.5x25, and 29.5x25 — are also available in select valve types.
Always confirm the following before placing your order:
Verify exact tire size and fitment before ordering.
Need help? Call 1 (866) 313-2180 or text photos to (310) 341-4694 with your tire size, valve type, and wheel photos.
Check the valve on your current inner tube — it will have a marking or you can identify the shape and angle. Bent valves (like TR75A and TRJS2) are angled for clearance in tight rim access areas. Straight valves (like TR15 and TR218A) pass straight through the rim hole. If you are unsure, send us a photo of your current valve and rim hole and we can identify the correct type.
A liner flap is a rubber strip that sits between the inner tube and the wheel rim. It protects the tube from friction, pinching, and sharp rim edges that could cause punctures. Most tube-type forklift tire assemblies use a liner flap. If you are replacing a tube, inspect the flap and replace it if it shows wear, cracking, or damage. Shop liner flaps here.
No. Inner tubes are only used with pneumatic tube-type tires. Solid resilient tires, cushion rubber press-ons, and polyurethane press-ons do not use inner tubes. If you are switching from pneumatic to solid, you will not need a tube or flap.
No. Inner tubes and liner flaps are sold separately. If you need both, add the matching liner flap to your order. Ordering 2 or more items qualifies for the 7.5% quantity discount, and 4 or more items qualifies for 15%.
We stock inner tubes for common forklift sizes (5.70x8 through 28x9-15) as well as larger OTR and loader sizes up to 29.5x29. Available sizes vary by valve type — select your valve subcategory to see which tire sizes are in stock.
Yes. Free ground freight is included for deliveries to commercial addresses in the contiguous U.S.