Snorkel Pair | 12x4 Snorkel Scissor Lift Tires S3219E | 2X DEAL
SKU 124SNORKEL
Mold-on Tire/WheelRubber Non MarkingExmile series
$471.17 each
2 for · 4+ items 15% off, sizes can mix
Save 7.5% on 2–3 eligible items and 15% on 4 or more, automatically in cart · Free ground freight to business addresses in the lower 48 · Fitment help (866) 313-2180
SKU 124SNORKEL
Mold-on Tire/WheelRubber Non MarkingExmile series
$471.17 each
2 for · 4+ items 15% off, sizes can mix
SKU 123318SNORKEL
Mold-on Tire/WheelRubber Non MarkingExmile series
$444.55 each
2 for · 4+ items 15% off, sizes can mix
SKU 123492SNORKEL
Mold-on Tire/WheelRubber Non MarkingExmile series
$444.55 each
2 for · 4+ items 15% off, sizes can mix
SKU 15538SNORKEL
Mold-on Tire/WheelRubber Non MarkingExmile series
$684.13 each
2 for · 4+ items 15% off, sizes can mix
SKU 135496SNORKEL
Mold-on Tire/WheelRubber Non MarkingExmile series
$471.17 each
2 for · 4+ items 15% off, sizes can mix
SKU 15438SNORKEL
Mold-on Tire/WheelRubber Non MarkingExmile series
$630.89 each
2 for · 4+ items 15% off, sizes can mix
Not sure which one fits? Send a photo of your tire's sidewall, your forklift make and model, and how many you need to sales@forklifttire.com, or call (866) 313-2180, Mon–Fri 8–5 Pacific.
Shop Snorkel-specific replacement tires sold as pairs (2X) for common Snorkel scissor lifts, vertical mast lifts, and mast boom lifts. Every product in this section is an Exmile CON-Series mold-on solid tire in non-marking rubber — the tire is cured directly onto the steel wheel during manufacturing and ships as a complete, ready-to-install assembly that bolts onto the machine.
Save 7.5% on 2–3 items | Save 15% on 4+ items — automatic discount in cart. Each pair counts as one item.
Free ground freight to commercial addresses in the contiguous U.S.
Size: 12x3
Front pair (hub 31.8) • Rear pair (hub 49.2)
Vertical Mast Lift
Size: 12x4
Pair (2X)
Electric Scissor Lift
Size: 15x4 (hub 38)
Pair (2X)
Electric Scissor Lift
Size: 15x5 (hub 38)
Pair (2X)
Electric Scissor Lifts
Each tire size corresponds to specific Snorkel models. Use the table below to identify the right replacement for your machine.
| Tire Size | Hub Spec | Snorkel Model | Position | Available As |
|---|---|---|---|---|
| 12x3 | Hub 31.8 | TM12 (Vertical Mast) | Front | Pair (2X) |
| 12x3 | Hub 49.2 | TM12 (Vertical Mast) | Rear | Pair (2X) |
| 12x4 | — | S3219E (Scissor) | — | Pair (2X) |
| 13.5x4 | Hub 96 | MB (Mast Boom) | Rear | Pair (2X) |
| 15x4 | Hub 38 | S3226 (Scissor) | — | Pair (2X) |
| 15x5 | Hub 38 | S4726, S4732 (Scissor) | — | Pair (2X) |
Some Snorkel models use different wheel assemblies at the front and rear axle positions, even when the tire size appears the same. This is the most important detail to verify before ordering.
Snorkel TM12: The front and rear tires are both 12x3, but the hub specifications are different — front uses hub 31.8 and rear uses hub 49.2. These are not interchangeable. Order the correct pair for each axle position, or order both pairs for a full-machine replacement.
Snorkel MB (Mast Boom Lift): The 13.5x4 (hub 96) tire listed here is a rear-axle replacement for the Snorkel MB series mast boom lift. Confirm this matches your machine position before ordering.
Every Snorkel replacement tire in this section is built on the Exmile CON-Series platform, a mold-on solid tire line that is OEM-approved by Genie, Manitou, Airo, and Dingli. The tire uses a high natural rubber compound with low rolling resistance, making it ideal for indoor scissor lift duty cycles. The rubber compound is cured directly onto the steel wheel during manufacturing, creating a permanent bond between tire and wheel. Each unit ships as a single, complete assembly.
There is no separate tire and wheel to mount. Installation is a straight bolt-on swap — remove the old tire-and-wheel assembly and bolt on the new one.
Safety Notice: Scissor lift tire replacement involves lifting and supporting equipment that weighs several thousand pounds. Always follow the jack point locations and support procedures in your Snorkel service manual. Use rated jack stands — never work under a machine supported only by a floor jack. If you are not trained or equipped for this work, have a qualified service technician perform the installation.
The installation steps above are provided as a general overview only and do not replace the procedures in your equipment manufacturer’s service manual.
All Snorkel aerial lift tires in this section are sold as pairs (2X). To replace all four tires, order the appropriate pair for each axle position.
Ordering 2 pairs qualifies for the 7.5% automatic discount (each pair counts as one item, 2 pairs = 2 items). Consolidating 4+ pairs across multiple machines in a single order reaches the 15% tier. For models like the TM12 where front and rear use different hub specs, a full-machine replacement requires two different pairs — one front pair (hub 31.8) and one rear pair (hub 49.2).
We recommend replacing all four tires at the same time whenever possible. Scissor lifts rely on consistent tire diameter across all four corners to maintain a level platform at height. Mismatched tire wear between axles can cause the machine to tilt beyond the limits of its pothole protection system, triggering a fault or creating a stability concern. For models like the TM12 where front and rear use different hub specs, a full-machine replacement requires two different pairs — one for each axle position.
Snorkel brand alone does not confirm fitment. Before placing your order, verify:
Verify exact tire size and fitment before ordering.
Brand Note: The primary brand for this product line is Exmile CON-Series. If the Exmile CON-Series is temporarily out of stock, an equivalent replacement brand may be substituted. Any substitute is guaranteed to fit the same Snorkel models and wheel configurations listed on this page.
We carry scissor lift tires organized by brand:
Need help verifying fitment? Call 1 (866) 313-2180 or text photos to (310) 341-4694 with your Snorkel model number and photos of your current wheels.
The TM12 uses 12x3 tires at both axle positions, but the front wheels use hub specification 31.8 and the rear wheels use hub specification 49.2. These are not interchangeable. You need to order the correct pair for each position — or both pairs for a complete machine replacement.
Snorkel scissor lifts, vertical mast lifts (TM12), and mast boom lifts (MB) all use mold-on solid tires made from non-marking rubber. The rubber is cured directly onto the steel wheel during manufacturing, so each tire ships as a complete assembly that bolts directly onto the machine. No separate mounting or pressing is required.
Yes. Every Snorkel replacement tire in this section uses non-marking rubber compound. This is standard for indoor scissor lifts operating on finished concrete, coated floors, and warehouse surfaces where black scuff marks are not acceptable.
Mold-on solid tires bolt directly onto the machine — no hydraulic press or tire mounting equipment is needed. Remove the old tire-and-wheel assembly from the hub and bolt on the new one. This makes replacement fast and possible with standard hand tools.
Yes. All Snorkel tires here are sold as pairs (2X) for a single axle. If only the front or rear needs replacement, order the appropriate pair. For a full-machine replacement on models with position-specific fitment (like the TM12), order both the front pair and the rear pair separately. We recommend replacing all four tires at the same time whenever possible, as consistent tire diameter across all four corners is important for maintaining a level platform at height.
This section covers the TM12, S3219E, S3226, S4726, S4732, and MB. Verify exact tire size, hub specification, and axle position before ordering — wheel specs can vary by serial range within the same model.
The primary brand is Exmile CON-Series, a mold-on solid tire line that is OEM-approved by Genie, Manitou, Airo, and Dingli. If the Exmile CON-Series is temporarily out of stock, an equivalent replacement brand may be substituted. Any substitute is guaranteed to fit the same Snorkel models and wheel configurations listed on this page.