1 (866) 313-2180
SALES@FORKLIFTTIRE.COM
-
Description
Exmile CON-Series 12x3 Mold-On Tire for Snorkel TM12 — Rear Pair (Hub 49.2)
One pair (2) of 12x3 non-marking mold-on solid tires on steel wheels, commonly used on certain Snorkel TM12 vertical mast lifts at the rear axle position (hub specification 49.2). Each tire is cured directly onto its steel wheel during manufacturing — they ship as complete, ready-to-install assemblies that bolt onto the machine with no pressing or mounting equipment required.
Save 7.5% on 2–3 items | Save 15% on 4+ items — automatic discount in cart. Each pair counts as one item.
What's Included
- 2× Exmile CON-Series 12x3 Mold-On Solid Tire & Wheel Assemblies (non-marking rubber)
Rear Axle Only: The Snorkel TM12 uses 12x3 tires at both axle positions, but the front and rear hub specifications are different. This pair uses hub 49.2 (rear axle). The front axle uses hub 31.8 — see the 12x3 (31.8) TM12 Front Pair for the front tires. These are not interchangeable.
Technical Specifications
Specification Value Tire Size 12x3 (metric: 305x76) Section Width 3″ (76 mm) Overall Diameter 12″ (305 mm) Tread Pattern SM (Smooth) Construction Mold-on solid rubber (tire cured directly onto steel wheel) Compound Non-marking gray rubber — safe for finished floors Load Capacity
Speed Load Capacity 6 km/h (3.7 mph) 1,675 lbs 10 km/h (6.2 mph) 1,102 lbs 25 km/h (15.5 mph) 772 lbs Static (0 km/h) 2,127 lbs Machine Fitment
Detail Value Brand Snorkel Model TM12 Machine Type Vertical Mast Lift Axle Position Rear Hub Specification 49.2 Tire Size 12x3 (305x76) Vertical Mast Lift — Not a Scissor Lift: The Snorkel TM12 is a vertical mast lift, not a scissor lift. It uses a telescoping mast rather than a scissor mechanism to raise the platform. The tire size and construction are the same type used across multiple aerial lift categories.
Exmile CON-Series — Mold-On Solid Construction
The Exmile CON-Series is a mold-on solid tire line OEM-approved by Genie, Manitou, Airo, and Dingli. The tire uses a high natural rubber tread compound with low rolling resistance, designed for long wear life in indoor aerial lift applications. The rubber is cured directly onto the steel wheel during manufacturing, creating a permanent bond between tire and wheel.
- Flat-proof — no air, no tubes, no flats
- Non-marking rubber — safe for finished concrete, coated floors, and warehouse surfaces
- Bolt-on installation — no hydraulic press or mounting equipment needed
- Long service life — solid rubber outlasts pneumatic alternatives in aerial lift duty cycles
Related Products
- 12x3 (31.8) Snorkel TM12 Front Pair — front tires for the same machine
- All Snorkel Aerial Lift Tires
- All Scissor Lift & Aerial Lift Tires
Shipping & Delivery
Free ground freight to commercial addresses in the contiguous U.S. with unloading capability. Standard processing is 0.5–2 business days; most orders arrive within 7–10 business days. Residential, island, Alaska, Hawaii, and international shipments: contact us for a shipping quote before ordering.
⚠ Verify Before Ordering
Mold-on tires are manufactured to specific wheel dimensions and cannot be exchanged once ordered. Before ordering, confirm:
- Hub specification — this pair uses hub 49.2 (rear axle); verify it matches your machine
- Axle position — rear axle only; front axle uses hub 31.8
- Current tire size — confirm 12x3 from sidewall markings or OEM spec sheet
- Machine model and serial number — wheel specs can vary by serial range
Verify exact tire size and fitment before ordering. Questions? Call 1 (866) 313‑2180 or contact us with your machine model and serial number.
Brand Note: The primary brand for this product is Exmile CON-Series. If the Exmile CON-Series is temporarily out of stock, an equivalent replacement brand may be substituted. Any substitute will fit the same machine and wheel configuration listed on this page.
Safety Notice: Aerial lift tire replacement involves lifting and supporting equipment that weighs several thousand pounds. Always follow the jack point locations and support procedures in your Snorkel service manual. Use rated jack stands — never work under a machine supported only by a floor jack. If you are not trained or equipped for this work, have a qualified service technician perform the installation.
Shipping AvailabilityMost orders arrive within 7-10 business days. Please contact us for expedited shipping.
-
Shipping Information
United States Shipping
Free Ground Freight to Commercial Addresses in the Contiguous U.S.
- Free freight applies to commercial delivery addresses in the lower 48 states with the ability to unload.
- Residential addresses, islands, Alaska, Hawaii, and international shipments require a custom shipping quote.
- Standard processing time is typically 0.5 to 2 business days.
Need a Residential or Special Delivery Quote?
Please contact us for shipping quotes to:
- Residential addresses
- Islands and remote delivery areas
- Alaska and Hawaii
- International destinations
If you need expedited shipping, contact us before ordering.
-
Warranty Information
WARRANTY INFORMATION Built for industrial use. Backed by real-world performance. Every tire and wheel we supply is guaranteed to be free from defects in workmanship and material under normal operating conditions. If a product fails due to a verified manufacturing defect during normal use, we will, at our discretion, repair or replace the product. COVERAGE - Applies to defects in materials or workmanship - Covers products used under normal operating conditions - Limited to repair or replacement of the original item LIMITATIONS - Warranty is limited to the original purchaser and is not transferable - Maximum liability is limited to the original purchase price of the product - Warranty does not cover consequential or incidental damages, including downtime, labor, or equipment loss EXCLUSIONS - Improper installation, misuse, overloading, or application outside intended use - Normal wear, damage from debris, or operating conditions beyond design limits - Products modified, altered, or installed outside of standard specifications - Applications where a premium compound or specific configuration was recommended but not used For warranty consideration, the product must be available for inspection and verification. Contact us at 1 (866) 313-2180 or sales@forklifttire.com. Full return policy: https://www.forklifttire.com/return-policy/
Exmile CON-Series 12x3 Mold-On Tire for Snorkel TM12 — Rear Pair (Hub 49.2)
One pair (2) of 12x3 non-marking mold-on solid tires on steel wheels, commonly used on certain Snorkel TM12 vertical mast lifts at the rear axle position (hub specification 49.2). Each tire is cured directly onto its steel wheel during manufacturing — they ship as complete, ready-to-install assemblies that bolt onto the machine with no pressing or mounting equipment required.
Save 7.5% on 2–3 items | Save 15% on 4+ items — automatic discount in cart. Each pair counts as one item.
What's Included
- 2× Exmile CON-Series 12x3 Mold-On Solid Tire & Wheel Assemblies (non-marking rubber)
Rear Axle Only: The Snorkel TM12 uses 12x3 tires at both axle positions, but the front and rear hub specifications are different. This pair uses hub 49.2 (rear axle). The front axle uses hub 31.8 — see the 12x3 (31.8) TM12 Front Pair for the front tires. These are not interchangeable.
Technical Specifications
| Specification | Value |
|---|---|
| Tire Size | 12x3 (metric: 305x76) |
| Section Width | 3″ (76 mm) |
| Overall Diameter | 12″ (305 mm) |
| Tread Pattern | SM (Smooth) |
| Construction | Mold-on solid rubber (tire cured directly onto steel wheel) |
| Compound | Non-marking gray rubber — safe for finished floors |
Load Capacity
| Speed | Load Capacity |
|---|---|
| 6 km/h (3.7 mph) | 1,675 lbs |
| 10 km/h (6.2 mph) | 1,102 lbs |
| 25 km/h (15.5 mph) | 772 lbs |
| Static (0 km/h) | 2,127 lbs |
Machine Fitment
| Detail | Value |
|---|---|
| Brand | Snorkel |
| Model | TM12 |
| Machine Type | Vertical Mast Lift |
| Axle Position | Rear |
| Hub Specification | 49.2 |
| Tire Size | 12x3 (305x76) |
Vertical Mast Lift — Not a Scissor Lift: The Snorkel TM12 is a vertical mast lift, not a scissor lift. It uses a telescoping mast rather than a scissor mechanism to raise the platform. The tire size and construction are the same type used across multiple aerial lift categories.
Exmile CON-Series — Mold-On Solid Construction
The Exmile CON-Series is a mold-on solid tire line OEM-approved by Genie, Manitou, Airo, and Dingli. The tire uses a high natural rubber tread compound with low rolling resistance, designed for long wear life in indoor aerial lift applications. The rubber is cured directly onto the steel wheel during manufacturing, creating a permanent bond between tire and wheel.
- Flat-proof — no air, no tubes, no flats
- Non-marking rubber — safe for finished concrete, coated floors, and warehouse surfaces
- Bolt-on installation — no hydraulic press or mounting equipment needed
- Long service life — solid rubber outlasts pneumatic alternatives in aerial lift duty cycles
Related Products
- 12x3 (31.8) Snorkel TM12 Front Pair — front tires for the same machine
- All Snorkel Aerial Lift Tires
- All Scissor Lift & Aerial Lift Tires
Shipping & Delivery
Free ground freight to commercial addresses in the contiguous U.S. with unloading capability. Standard processing is 0.5–2 business days; most orders arrive within 7–10 business days. Residential, island, Alaska, Hawaii, and international shipments: contact us for a shipping quote before ordering.
⚠ Verify Before Ordering
Mold-on tires are manufactured to specific wheel dimensions and cannot be exchanged once ordered. Before ordering, confirm:
- Hub specification — this pair uses hub 49.2 (rear axle); verify it matches your machine
- Axle position — rear axle only; front axle uses hub 31.8
- Current tire size — confirm 12x3 from sidewall markings or OEM spec sheet
- Machine model and serial number — wheel specs can vary by serial range
Verify exact tire size and fitment before ordering. Questions? Call 1 (866) 313‑2180 or contact us with your machine model and serial number.
Brand Note: The primary brand for this product is Exmile CON-Series. If the Exmile CON-Series is temporarily out of stock, an equivalent replacement brand may be substituted. Any substitute will fit the same machine and wheel configuration listed on this page.
Safety Notice: Aerial lift tire replacement involves lifting and supporting equipment that weighs several thousand pounds. Always follow the jack point locations and support procedures in your Snorkel service manual. Use rated jack stands — never work under a machine supported only by a floor jack. If you are not trained or equipped for this work, have a qualified service technician perform the installation.
Most orders arrive within 7-10 business days. Please contact us for expedited shipping.
- Purchase Type: x2 Scissor Lift Deal
- Overall Diameter: 12 in / 304.8 mm
- Section Width: 3 in / 76.2 mm
- Tire Construction: Mold-on Tire/Wheel
- Tire Material: Rubber Non Marking
- Line: Exmile series
United States Shipping
Free Ground Freight to Commercial Addresses in the Contiguous U.S.
- Free freight applies to commercial delivery addresses in the lower 48 states with the ability to unload.
- Residential addresses, islands, Alaska, Hawaii, and international shipments require a custom shipping quote.
- Standard processing time is typically 0.5 to 2 business days.
Need a Residential or Special Delivery Quote?
Please contact us for shipping quotes to:
- Residential addresses
- Islands and remote delivery areas
- Alaska and Hawaii
- International destinations
If you need expedited shipping, contact us before ordering.
