Snorkel

Snorkel Scissor Lift & Aerial Lift Tire Sets

Shop Snorkel-specific replacement tires sold as pairs (2X) for common Snorkel scissor lifts, vertical mast lifts, and mast boom lifts. Every product in this section is an Exmile CON-Series mold-on solid tire in non-marking rubber — the tire is cured directly onto the steel wheel during manufacturing and ships as a complete, ready-to-install assembly that bolts onto the machine.

Save 7.5% on 2–3 items | Save 15% on 4+ items — automatic discount in cart. Each pair counts as one item.
Free ground freight to commercial addresses in the contiguous U.S.

Shop by Snorkel Model

Snorkel Tire Sizes & Fitment

Each tire size corresponds to specific Snorkel models. Use the table below to identify the right replacement for your machine.

Front vs. Rear — Position-Specific Fitment

Some Snorkel models use different wheel assemblies at the front and rear axle positions, even when the tire size appears the same. This is the most important detail to verify before ordering.

Exmile CON-Series — Mold-On Solid Construction

Every Snorkel replacement tire in this section is built on the Exmile CON-Series platform, a mold-on solid tire line that is OEM-approved by Genie, Manitou, Airo, and Dingli. The tire uses a high natural rubber compound with low rolling resistance, making it ideal for indoor scissor lift duty cycles. The rubber compound is cured directly onto the steel wheel during manufacturing, creating a permanent bond between tire and wheel. Each unit ships as a single, complete assembly.

There is no separate tire and wheel to mount. Installation is a straight bolt-on swap — remove the old tire-and-wheel assembly and bolt on the new one.

• Flat-proof — no air, no tubes, no flats
• Non-marking rubber — safe for finished concrete, coated floors, and warehouse surfaces
• Bolt-on installation — no hydraulic press or mounting equipment needed
• Long service life — solid rubber outlasts pneumatic alternatives in scissor lift duty cycles

Pairs vs. Full-Machine Replacement

All Snorkel aerial lift tires in this section are sold as pairs (2X). To replace all four tires, order the appropriate pair for each axle position.

Ordering 2 pairs qualifies for the 7.5% automatic discount (each pair counts as one item, 2 pairs = 2 items). Consolidating 4+ pairs across multiple machines in a single order reaches the 15% tier. For models like the TM12 where front and rear use different hub specs, a full-machine replacement requires two different pairs — one front pair (hub 31.8) and one rear pair (hub 49.2).

We recommend replacing all four tires at the same time whenever possible. Scissor lifts rely on consistent tire diameter across all four corners to maintain a level platform at height. Mismatched tire wear between axles can cause the machine to tilt beyond the limits of its pothole protection system, triggering a fault or creating a stability concern. For models like the TM12 where front and rear use different hub specs, a full-machine replacement requires two different pairs — one for each axle position.

Before Ordering

Snorkel brand alone does not confirm fitment. Before placing your order, verify:

• Snorkel model number — TM12, S3219E, S3226, S4726, S4732, or MB
• Current tire size — check the sidewall markings or machine data plate
• Axle position — front or rear, especially for the TM12 and MB
• Hub specification — confirm hub size matches your existing wheel
• Quantity needed — one pair for a single axle or two pairs for a full machine

Verify exact tire size and fitment before ordering.

Also Shopping for Other Brands?

We carry scissor lift tires organized by brand:

Need help verifying fitment? Call 1 (866) 313-2180 or text photos to (310) 341-4694 with your Snorkel model number and photos of your current wheels.

Frequently Asked Questions

Why does the Snorkel TM12 have two different tire listings at the same size?

The TM12 uses 12x3 tires at both axle positions, but the front wheels use hub specification 31.8 and the rear wheels use hub specification 49.2. These are not interchangeable. You need to order the correct pair for each position — or both pairs for a complete machine replacement.

What type of tires do Snorkel aerial lifts use?

Snorkel scissor lifts, vertical mast lifts (TM12), and mast boom lifts (MB) all use mold-on solid tires made from non-marking rubber. The rubber is cured directly onto the steel wheel during manufacturing, so each tire ships as a complete assembly that bolts directly onto the machine. No separate mounting or pressing is required.

Are these tires non-marking?

Yes. Every Snorkel replacement tire in this section uses non-marking rubber compound. This is standard for indoor scissor lifts operating on finished concrete, coated floors, and warehouse surfaces where black scuff marks are not acceptable.

How are mold-on solid tires installed?

Mold-on solid tires bolt directly onto the machine — no hydraulic press or tire mounting equipment is needed. Remove the old tire-and-wheel assembly from the hub and bolt on the new one. This makes replacement fast and possible with standard hand tools.

Can I replace just one axle position instead of the full machine?

Yes. All Snorkel tires here are sold as pairs (2X) for a single axle. If only the front or rear needs replacement, order the appropriate pair. For a full-machine replacement on models with position-specific fitment (like the TM12), order both the front pair and the rear pair separately. We recommend replacing all four tires at the same time whenever possible, as consistent tire diameter across all four corners is important for maintaining a level platform at height.

Which Snorkel models do these tires fit?

This section covers the TM12, S3219E, S3226, S4726, S4732, and MB. Verify exact tire size, hub specification, and axle position before ordering — wheel specs can vary by serial range within the same model.

What brand are these tires?

The primary brand is Exmile CON-Series, a mold-on solid tire line that is OEM-approved by Genie, Manitou, Airo, and Dingli. If the Exmile CON-Series is temporarily out of stock, an equivalent replacement brand may be substituted. Any substitute is guaranteed to fit the same Snorkel models and wheel configurations listed on this page.