1 (866) 313-2180
SALES@FORKLIFTTIRE.COMSkyjack Scissor Lift Tire Sets
Shop Skyjack-specific replacement tires sold as brake pairs, non-brake pairs, and complete sets (4X) for common Skyjack SJ III scissor lifts. Every product in this section is an Exmile CON-Series mold-on solid tire in non-marking rubber — the tire is cured directly onto the steel wheel during manufacturing and ships as a complete, ready-to-install assembly.
Save 7.5% on 2–3 items | Save 15% on 4+ items — automatic discount in cart. Each pair or set counts as one item.
Free ground freight to commercial addresses in the contiguous U.S.
Shop by Skyjack Model
SJ III 3215 • 3219
Tire Size: 12x4 (hub 72)
Brake pair • Non-brake pair • Complete set (4X)
SJ III 3220 • 3226 • 4626 • 4632
Tire Size: 16x5 (hub 86)
Brake pair • Non-brake pair • Complete set (4X)
Brake vs. Non-Brake Wheels
Skyjack SJ III scissor lifts use different wheel assemblies at brake and non-brake axle positions. This is the most important detail to verify before ordering — brake and non-brake wheels are not interchangeable.
| Configuration | What It Means | When to Choose |
|---|---|---|
| Brake Pair (2X) | Tire-and-wheel assembly for the axle position with the brake mechanism | Replacing only the brake-side wheels |
| Non-Brake Pair (2X) | Tire-and-wheel assembly for the axle position without a brake mechanism | Replacing only the non-brake-side wheels |
| Complete Set (4X) | 2 brake wheels + 2 non-brake wheels — all four positions covered | Full-machine replacement in one order |
Installing a non-brake wheel in a brake position (or vice versa) will not fit correctly. Check your machine data plate or identify which axle has the brake mechanism before ordering. If you are unsure, contact us with your Skyjack model number and photos of your current wheels.
Skyjack Tire Sizes & Fitment
| Tire Size | Hub Spec | Skyjack Models | Available As |
|---|---|---|---|
| 12x4 | Hub 72 | SJ III 3215, 3219 | Brake pair • Non-brake pair • Set (4X) |
| 16x5 | Hub 86 | SJ III 3220, 3226, 4626, 4632 | Brake pair • Non-brake pair • Set (4X) |
Complete sets (4X) include 2 brake wheels + 2 non-brake wheels pre-configured for each model — no need to order brake and non-brake pairs separately.
Exmile CON-Series — Mold-On Solid Construction
Every Skyjack replacement tire in this section uses Exmile CON-Series mold-on solid construction — a premium, non-marking tire line that is OEM-approved by Genie, Manitou, Airo, and Dingli. The rubber compound is cured directly onto the steel wheel during manufacturing, creating a permanent bond between the tire and the wheel. Each unit ships as a single, complete assembly with high natural rubber compound and low rolling resistance.
There is no separate tire and wheel to mount. Installation is a straight bolt-on swap — remove the old tire-and-wheel assembly and bolt on the new one.
- Flat-proof — no air, no tubes, no flats
- Non-marking rubber — safe for finished concrete, coated floors, and warehouse surfaces
- Bolt-on installation — no hydraulic press or mounting equipment needed
- Long service life — solid rubber outlasts pneumatic alternatives in scissor lift duty cycles
Safety Notice: Scissor lift tire replacement involves lifting and supporting equipment that weighs several thousand pounds. Always follow the jack point locations and support procedures in your Skyjack service manual. Use rated jack stands — never work under a machine supported only by a floor jack. If you are not trained or equipped for this work, have a qualified service technician perform the installation.
The installation steps above are provided as a general overview only and do not replace the procedures in your equipment manufacturer’s service manual.
Pairs vs. Complete Sets
| Consideration | Buy Individual Pairs | Buy a Complete Set (4X) |
|---|---|---|
| When to Choose | Only brake or non-brake side is worn | All four tires worn or you want a matched replacement |
| Configuration | You select brake or non-brake separately | Includes correct brake + non-brake mix |
| Cost | Lower upfront for a single pair | Better value — and ordering multiple sets qualifies for quantity discounts |
| Best For | Targeted replacement of one axle position | Fleet maintenance, full machine refresh |
Tip: Each pair or complete set counts as one item in the cart. Ordering 2 or more items qualifies for the 7.5% discount automatically. Consolidating 4+ items in a single order reaches the 15% tier.
We recommend replacing all four tires at the same time whenever possible. Scissor lifts rely on consistent tire diameter across all four corners to maintain a level platform at height. Mismatched tire wear between axles can cause the machine to tilt beyond the limits of its pothole protection system, triggering a fault or creating a stability concern. Complete sets (4X) with the correct brake and non-brake wheel mix are the simplest way to achieve a full-machine refresh in one order.
Before Ordering
Skyjack brand alone does not confirm fitment. Before placing your order, verify:
- Skyjack model number — SJ III 3215, 3219, 3220, 3226, 4626, or 4632
- Current tire size — check the sidewall markings or machine data plate
- Brake or non-brake position — identify which axle has the brake mechanism
- Quantity needed — brake pair, non-brake pair, or complete set (4X)
Verify exact tire size and fitment before ordering.
Brand Note: The primary brand for this product line is Exmile CON-Series. If the Exmile CON-Series is temporarily out of stock, an equivalent replacement brand may be substituted. Any substitute is guaranteed to fit the same Skyjack models and wheel configurations listed on this page.
Also Shopping for Other Brands?
We carry scissor lift tires organized by brand:
Need help verifying fitment? Call 1 (866) 313-2180 or text photos to (310) 341-4694 with your Skyjack model number and photos of your current wheels.
Frequently Asked Questions
What is the difference between brake and non-brake Skyjack wheels?
Skyjack SJ III scissor lifts use different wheel assemblies at the brake and non-brake axle positions. The brake wheels include a built-in brake mechanism that the non-brake wheels do not have. These are not interchangeable — installing a non-brake wheel in a brake position will not fit correctly. If ordering pairs, make sure you select the correct configuration for the axle position you are replacing.
Should I buy individual pairs or a complete set?
If only the brake or non-brake side needs replacement, an individual pair works. If all four tires are worn, the complete set (4X) includes 2 brake wheels and 2 non-brake wheels pre-configured for your model — no need to select configurations separately. Complete sets also offer better overall value compared to ordering two pairs individually and ensure uniform tread height across all four corners for consistent platform stability.
What type of tires do Skyjack scissor lifts use?
Skyjack indoor scissor lifts use mold-on solid tires made from non-marking rubber. The rubber is cured directly onto the steel wheel during manufacturing, so each tire ships as a complete assembly that bolts directly onto the machine. No separate mounting or pressing is required.
Are these tires non-marking?
Yes. Every Skyjack replacement tire in this section uses non-marking rubber compound. This is standard for indoor scissor lifts operating on finished concrete, coated floors, and warehouse surfaces where black scuff marks are not acceptable.
How are mold-on solid tires installed?
Mold-on solid tires bolt directly onto the machine — no hydraulic press or tire mounting equipment is needed. Remove the old tire-and-wheel assembly from the hub and bolt on the new one. For Skyjack lifts, make sure the replacement matches the correct brake or non-brake position.
Which Skyjack models do these tires fit?
This section covers the SJ III 3215 and 3219 (12x4 tires, hub 72) and the SJ III 3220, 3226, 4626, and 4632 (16x5 tires, hub 86). Verify exact tire size and fitment before ordering — wheel specs can vary by serial range within the same model.
What brand are these tires?
The primary brand is Exmile CON-Series, a mold-on solid tire line that is OEM-approved by Genie, Manitou, Airo, and Dingli. If the Exmile CON-Series is temporarily out of stock, an equivalent replacement brand may be substituted. Any substitute is guaranteed to fit the same Skyjack models and wheel configurations listed on this page.