1 (866) 313-2180
SALES@FORKLIFTTIRE.COM
-
Description
10x3 Mold-On Solid Tires for Genie GR-12, GR-15 & GR-20 Vertical Mast Lifts
This is one pair (2) of 10x3 (254x76) Exmile CON-Series non-marking mold-on solid tires on steel wheels commonly used on Genie Runabout vertical mast lifts including the GR-12, GR-15, and GR-20. Each tire is cured directly onto its steel wheel during manufacturing, creating a permanent bond that eliminates tire slippage. They ship as complete, ready-to-bolt assemblies — no mounting, no pressing, no special tools.
Save 7.5% on 2–3 items | Save 15% on 4+ items — automatic discount in cart. Each pair counts as one item.
Free ground freight to commercial addresses in the contiguous U.S.What’s Included
- 2× 10x3 (254x76) Exmile CON-Series Mold-On Solid Tire & Wheel Assemblies (non-marking rubber)
Why Exmile CON-Series Mold-On Tires?
The Exmile CON-Series is OEM-approved by Genie and uses a high natural rubber tread compound engineered for low rolling resistance and extended wear life. The tire is cured directly onto the steel wheel, creating a permanent bond that eliminates slippage and ensures consistent performance under load. CON-Series tires are flat-proof, require zero maintenance, and significantly outlast pneumatic tires in aerial lift applications where puncture hazards and constant repositioning are the norm.
The 10x3 size uses a RIB2 tread pattern — a smooth, low-profile rib design that minimizes rolling resistance and floor marking on finished warehouse and retail surfaces. This is the same pattern specified by Genie for GR-series Runabout lifts.
Technical Specifications
Tire Size 10x3 (metric: 254x76) Section Width 3″ (76 mm) Overall Diameter 10″ (254 mm) Tread Pattern RIB2 Construction Mold-on solid rubber (tire cured directly onto steel wheel) Compound Non-marking rubber — safe for finished floors OEM Part Reference Genie 57998 / 57998GT Load Capacity Ratings (Per Tire)
Condition Load Capacity @ 6 km/h (3.7 mph) 1,455 lbs @ 10 km/h (6.2 mph) 959 lbs @ 25 km/h (15.5 mph) 672 lbs Static Load 1,863 lbs Machine Fitment
Genie Model Machine Type Platform Height Capacity GR-12 (Runabout) Vertical Mast Lift 12′ 500 lb GR-15 (Runabout) Vertical Mast Lift 15′ 500 lb GR-20 (Runabout) Vertical Mast Lift 20′ 500 lb The 10x3 (254x76) tire is commonly used on certain Genie Runabout vertical mast lifts. Verify exact tire size and fitment before ordering.
ⓘ Wheel Configuration Note: The standard listing is for the integrated hub (hubless) wheel. A 5-hole bolt-on wheel version is also available but may not always be in stock. If your GR-12, GR-15, or GR-20 uses a 5-hole wheel pattern, contact us to confirm availability before ordering.About the Genie Runabout Series
The Genie GR-12, GR-15, and GR-20 are compact vertical mast lifts designed for indoor maintenance, stock picking, and light installation work in tight spaces. Their narrow chassis and zero-turn capability make them ideal for warehouse aisles, retail stores, and facility maintenance where a full scissor lift would be too large. The non-marking compound on these tires protects finished concrete, epoxy, tile, and polished floors from scuff marks.
When to Replace Your Runabout Tires
Vertical mast lifts rely on all tires being the same diameter to maintain platform levelness and drive accuracy. Uneven tire wear can cause the machine to pull to one side and may trigger pothole-protection or tilt faults. Replace tires when you see visible flat spots, chunking, or when tread is worn to the wear indicators. For consistent platform performance, replace tires in a complete set rather than individually.
Related Products
- Shop All Genie Aerial Lift Tires — GS-series, Z-series, X-series, and GR-series
- Exmile CON-Series Scissor Lift & Aerial Lift Tires — Full Catalog & Specs
Shipping
Free ground freight to commercial addresses in the contiguous U.S. with unloading capability. Standard processing is 0.5–2 business days; most orders arrive within 7–10 business days. Residential, island, Alaska, Hawaii, and international shipments: contact us for a shipping quote before ordering.
⚠ Verify Before Ordering
Mold-on tires are manufactured to specific wheel dimensions and cannot be exchanged once ordered. Before ordering, confirm:
- Current tire size — confirm your machine uses 10x3 tires (check sidewall markings or OEM spec sheet)
- Wheel type — integrated hub or 5-hole bolt pattern (see note above)
- Machine model and serial number — wheel specs can vary by serial range within the same model
Not sure? Contact us at 1 (866) 313-2180 with your machine make, model, and serial number and we’ll confirm fitment.
⚠ Safety Disclaimer: The specifications listed are sourced from the Exmile CON-Series catalog and Genie OEM documentation. Forklift Tire Company is not the tire manufacturer. Always verify that your machine’s tire size, hub configuration, and load requirements match the product specifications before ordering. Operating a lift with incorrect tires can result in instability and serious injury.Brand Substitution Notice: This listing ships the Exmile CON-Series as the primary brand. In rare cases where a specific size is temporarily out of stock, an equivalent-specification brand may be substituted. If brand preference is critical, note it in your order comments or contact us before placing your order.Shipping AvailabilityMost orders arrive within 7-10 business days. Please contact us for expedited shipping.
-
Shipping Information
United States Shipping
Free Ground Freight to Commercial Addresses in the Contiguous U.S.
- Free freight applies to commercial delivery addresses in the lower 48 states with the ability to unload.
- Residential addresses, islands, Alaska, Hawaii, and international shipments require a custom shipping quote.
- Standard processing time is typically 0.5 to 2 business days.
Need a Residential or Special Delivery Quote?
Please contact us for shipping quotes to:
- Residential addresses
- Islands and remote delivery areas
- Alaska and Hawaii
- International destinations
If you need expedited shipping, contact us before ordering.
-
Warranty Information
WARRANTY INFORMATION Built for industrial use. Backed by real-world performance. Every tire and wheel we supply is guaranteed to be free from defects in workmanship and material under normal operating conditions. If a product fails due to a verified manufacturing defect during normal use, we will, at our discretion, repair or replace the product. COVERAGE - Applies to defects in materials or workmanship - Covers products used under normal operating conditions - Limited to repair or replacement of the original item LIMITATIONS - Warranty is limited to the original purchaser and is not transferable - Maximum liability is limited to the original purchase price of the product - Warranty does not cover consequential or incidental damages, including downtime, labor, or equipment loss EXCLUSIONS - Improper installation, misuse, overloading, or application outside intended use - Normal wear, damage from debris, or operating conditions beyond design limits - Products modified, altered, or installed outside of standard specifications - Applications where a premium compound or specific configuration was recommended but not used For warranty consideration, the product must be available for inspection and verification. Contact us at 1 (866) 313-2180 or sales@forklifttire.com. Full return policy: https://www.forklifttire.com/return-policy/
10x3 Mold-On Solid Tires for Genie GR-12, GR-15 & GR-20 Vertical Mast Lifts
This is one pair (2) of 10x3 (254x76) Exmile CON-Series non-marking mold-on solid tires on steel wheels commonly used on Genie Runabout vertical mast lifts including the GR-12, GR-15, and GR-20. Each tire is cured directly onto its steel wheel during manufacturing, creating a permanent bond that eliminates tire slippage. They ship as complete, ready-to-bolt assemblies — no mounting, no pressing, no special tools.
Save 7.5% on 2–3 items | Save 15% on 4+ items — automatic discount in cart. Each pair counts as one item.
Free ground freight to commercial addresses in the contiguous U.S.
What’s Included
- 2× 10x3 (254x76) Exmile CON-Series Mold-On Solid Tire & Wheel Assemblies (non-marking rubber)
Why Exmile CON-Series Mold-On Tires?
The Exmile CON-Series is OEM-approved by Genie and uses a high natural rubber tread compound engineered for low rolling resistance and extended wear life. The tire is cured directly onto the steel wheel, creating a permanent bond that eliminates slippage and ensures consistent performance under load. CON-Series tires are flat-proof, require zero maintenance, and significantly outlast pneumatic tires in aerial lift applications where puncture hazards and constant repositioning are the norm.
The 10x3 size uses a RIB2 tread pattern — a smooth, low-profile rib design that minimizes rolling resistance and floor marking on finished warehouse and retail surfaces. This is the same pattern specified by Genie for GR-series Runabout lifts.
Technical Specifications
| Tire Size | 10x3 (metric: 254x76) |
| Section Width | 3″ (76 mm) |
| Overall Diameter | 10″ (254 mm) |
| Tread Pattern | RIB2 |
| Construction | Mold-on solid rubber (tire cured directly onto steel wheel) |
| Compound | Non-marking rubber — safe for finished floors |
| OEM Part Reference | Genie 57998 / 57998GT |
Load Capacity Ratings (Per Tire)
| Condition | Load Capacity |
|---|---|
| @ 6 km/h (3.7 mph) | 1,455 lbs |
| @ 10 km/h (6.2 mph) | 959 lbs |
| @ 25 km/h (15.5 mph) | 672 lbs |
| Static Load | 1,863 lbs |
Machine Fitment
| Genie Model | Machine Type | Platform Height | Capacity |
|---|---|---|---|
| GR-12 (Runabout) | Vertical Mast Lift | 12′ | 500 lb |
| GR-15 (Runabout) | Vertical Mast Lift | 15′ | 500 lb |
| GR-20 (Runabout) | Vertical Mast Lift | 20′ | 500 lb |
The 10x3 (254x76) tire is commonly used on certain Genie Runabout vertical mast lifts. Verify exact tire size and fitment before ordering.
About the Genie Runabout Series
The Genie GR-12, GR-15, and GR-20 are compact vertical mast lifts designed for indoor maintenance, stock picking, and light installation work in tight spaces. Their narrow chassis and zero-turn capability make them ideal for warehouse aisles, retail stores, and facility maintenance where a full scissor lift would be too large. The non-marking compound on these tires protects finished concrete, epoxy, tile, and polished floors from scuff marks.
When to Replace Your Runabout Tires
Vertical mast lifts rely on all tires being the same diameter to maintain platform levelness and drive accuracy. Uneven tire wear can cause the machine to pull to one side and may trigger pothole-protection or tilt faults. Replace tires when you see visible flat spots, chunking, or when tread is worn to the wear indicators. For consistent platform performance, replace tires in a complete set rather than individually.
Related Products
- Shop All Genie Aerial Lift Tires — GS-series, Z-series, X-series, and GR-series
- Exmile CON-Series Scissor Lift & Aerial Lift Tires — Full Catalog & Specs
Shipping
Free ground freight to commercial addresses in the contiguous U.S. with unloading capability. Standard processing is 0.5–2 business days; most orders arrive within 7–10 business days. Residential, island, Alaska, Hawaii, and international shipments: contact us for a shipping quote before ordering.
⚠ Verify Before Ordering
Mold-on tires are manufactured to specific wheel dimensions and cannot be exchanged once ordered. Before ordering, confirm:
- Current tire size — confirm your machine uses 10x3 tires (check sidewall markings or OEM spec sheet)
- Wheel type — integrated hub or 5-hole bolt pattern (see note above)
- Machine model and serial number — wheel specs can vary by serial range within the same model
Not sure? Contact us at 1 (866) 313-2180 with your machine make, model, and serial number and we’ll confirm fitment.
Most orders arrive within 7-10 business days. Please contact us for expedited shipping.
- Purchase Type: x2 Scissor Lift Deal
- Overall Diameter: 10 in / 254 mm
- Section Width: 3 in / 76.2 mm
- Tire Construction: Mold-on Tire/Wheel
- Tire Material: Rubber Non Marking
- Line: Exmile series
United States Shipping
Free Ground Freight to Commercial Addresses in the Contiguous U.S.
- Free freight applies to commercial delivery addresses in the lower 48 states with the ability to unload.
- Residential addresses, islands, Alaska, Hawaii, and international shipments require a custom shipping quote.
- Standard processing time is typically 0.5 to 2 business days.
Need a Residential or Special Delivery Quote?
Please contact us for shipping quotes to:
- Residential addresses
- Islands and remote delivery areas
- Alaska and Hawaii
- International destinations
If you need expedited shipping, contact us before ordering.
