1 (866) 313-2180
SALES@FORKLIFTTIRE.COM5.00-8 / 500x8 Forklift Tires
5.00-8, also commonly written as 500x8, is one of the most common steer (rear) forklift tire sizes used on internal combustion forklifts in warehouse, distribution, manufacturing, and light industrial environments.
This page helps you shop 5.00-8 forklift tires by construction type, with access to Solid Resilient, Pneumatic Tube-Type, split wheels, mounted assemblies, and matched tire sets.
5.00-8 and 500x8 Are the Same Size Class
Both 5.00-8 and 500x8 refer to the same forklift tire size class. The way the size is written can vary by manufacturer, listing format, and product type.
5.00-8 is the standard industrial size format, while 500x8 is a shorthand version commonly used in search and catalog references.
Always verify the exact size printed on your current tire sidewall and confirm wheel specifications before ordering.
Common Steer Tire Pairings
5.00-8 is most commonly used in the rear steer position on many internal combustion forklifts.
Common matched drive sizes include:
Because steer tires affect maneuverability, turning feel, and directional stability, selecting the proper construction type and wheel setup matters.
Shop 5.00-8 by Construction Type
5.00-8 forklift tires are commonly available in the following constructions:
Pneumatic Tube-Type (TTF) — Air-filled bias forklift tires that use a tire, inner tube, and liner flap. These are commonly selected for mixed indoor and outdoor applications where ride cushioning and impact absorption are important. Ply ratings can vary by manufacturer and application.
Solid Resilient (RS) — Flat-proof, pneumatic-shaped solid rubber forklift tires designed to reduce downtime caused by punctures while maintaining dependable load stability.
Browse Pneumatic and Solid Resilient Forklift Tires →
Quick Links for 5.00-8 Shoppers
Shop 6.50-10 Drive Pairing →
Shop 7.00-12 Drive Pairing →
Shop 6.50-10 & 5.00-8 Sets →
Shop 8x3 6-Hole Split Wheel →
View 5.00-8 Tire & Wheel Assembly →
Black Rubber and Non-Marking Options
5.00-8 solid resilient forklift tires are commonly available in both standard black rubber and non-marking compounds.
- Standard Black Rubber — Common for general industrial and outdoor use where floor marking is not a primary concern.
- Non-Marking Rubber — Common for clean warehouse and regulated environments where reducing floor marks is important.
Compatible Wheel Hardware
This size commonly mounts on an 8x3 6-Hole Two-Piece Split Wheel.
Because bolt pattern, center bore, and offset can vary by forklift model, always verify your wheel specifications before ordering wheels or mounted assemblies.
Mounted Tire and Wheel Assemblies
If you want a faster installation path, 5.00-8 is also available as a mounted tire and wheel assembly, which can simplify ordering and reduce downtime compared with sourcing the tire and wheel separately.
View 5.00-8 Tire & Wheel Assembly →
Common Matched Tire Configurations
5.00-8 steer tires are frequently matched with the following drive sizes depending on forklift capacity and configuration:
6.50-10 — Common on many mid-capacity IC forklifts
7.00-12 — Common on certain larger configurations
Choosing the Right 5.00-8 Forklift Tire
The right 5.00-8 / 500x8 forklift tire depends on tire position, operating surface, load demands, wheel type, floor marking requirements, and tolerance for flat-related downtime. Review the available construction types, wheel options, and matched set choices on this page to find the best fit for your forklift and application.